Our products are fully compatible with all signals, scales and control systems, DC or DCC, and operate independently of these systems
Our systems include detection and provide prototypical
operation independent of track power.
No soldering is necessary and installation does not
disrupt existing layouts.
The FlashMaster #8003
Provides prototipical grade crossing flasher control. the
basic unit configured for one track bi-directional operation.
It can be expanded to dual track operation with addition
Optical Sensor Expander Cable (#8004). Beyond two tracks
an additional control card is required.
The unit can drive up to 8 paires of LEDs and requires
7-18 volts AC or DC 300ma.
#8003 FlashMaster $119.99
#8004 Expander Cable $49.99
The ServoMaster #8000
Provides activation for crossing gates and 3 position semaphores. For crossing gates 4 optical sensors will allow single track bi-directional operation, or dual track
uni-directional operation. Expansion kits will allow up to 3 additional bi-directional tracks. The unit also controls the crossing lights for common anode LEDs. An out put is provided to add a bell sound module (no provided)
The unit requires 9-16 volts, AC or DC rated for at least 500ma.
#8000 ServoMaster $179.99
#8001 Expansion Kit $99.99
#8002 Optical Sensor Kit $49.99
NJI/servomaster_manual_v3p4.pdf
NJI/servomaster_step_by_step.pdf
ABS Master Signal System (#8005) $179.99
Operates with any control system, DC or DCC.
Provides single track uni-directional signal control.
Each ABS Master can control up to 4 three aspect LED type
signals via optical sensors.
Unit requires 7-18 volts AC or DC, 300ma
#8301 3 Pack $169.99
#8302 6 Pack $299.99
NOW AVAILABLE
 |
Operates From 9v-14v AC or DC |
|
Provides Single Track Bi-directional Operation |
|
Sensor Detection, Self Adjusting |
|
Operates All Types Of Light Signals Any Scale |
|
Common Anode Sigbals Only |
|
Has The Ability To Daisy Chain Additional Circuits |
|
Interlocking Features For Dual Head Signals |
THE NEW SIMPLE SIGNAL CIRCUIT